Siniat Standard Board is a general purpose gypsum plasterboard suitable for use in partitions, linings and ceilings in both domestic and commercial applications. Made from aerated calcium sulphate di-hydrate enclosed inside liners made from recycled waste paper, it is coloured ivory on the front and grey on the back, and is suitable for tape and jointing or skimming. Multiple layers can be used where additional performance is required. Reaction to fire rated Euroclass A2-s1, d0 and compliant to BS EN 520:2004+A1:2009 Type A. This 12.5mm board is supplied with a square edge, 2400 x 900mm, and offers a longitudinal breaking load of ≥550N and transversal breaking load of ≥210N.

Benefits

General purpose board suitable for walls, ceilings and partitions
Reaction to fire Euroclass A2-s1, d0 for excellent fire resistance
Suitable for tape and jointing or skimming finishes
Compliant to BS EN 520:2004+A1:2009 Type A
Can be used in multiple layers for added performance
Recycled paper liners with low moisture content (less than 2%)
Manufactured to ISO 9001 and ISO 14001 certified standards

Good to know

Size: 2400 x 900 x 12.5mm; edge: square; colour: ivory front, grey back
Mass: 8.0 kg/m²; board weight approximately 17.3 kg; thermal conductivity: 0.19 W/mK; water vapour resistance factor: μ = 10
Flexural strength: longitudinal ≥550N, transversal ≥210N
Use Siniat High Thread screws for timber, Self Tapping for thin gauge metal up to 0.7mm, or Self Drilling for metal up to 2.5mm
Not suitable for high humidity areas
Service life of 60 years; 12.64% recycled content
Always refer to the Siniat Standard Board technical datasheet before installation

Plasterboard

12.5mm Siniat GTEC Standard Wallboard (Square Edge) 2400mm x 900mm